Maxtor Smart Error Code
Check cabling and retest. Ziff Davis. Several instances of information on data positioning and location could not be found. Retrieved 21 January 2015. ^ "SMART IV Technology on HP Business Desktop Hard Drives" (PDF). his comment is here
Seagate Seatools Error Codes List
The cable is loose, broken, or not plugged in. Replace the drive if the repair fails. Return to Top Data Lifeguard Tools 2.8 Error Codes Note: If the same error code is encountered more than once after re-testing, please Contact Us for additional assistance. Error code error at all, except the temperature, meaning that S.M.A.R.T.
Re-test with appropriate diagnostic utility 0001 - 0008, 0015 SMART Error Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. This may be due to a defect with the drive or a bad connection. This allows a drive with bad sectors to continue operation. Smart Hard Drive Test Replace the drive if the error repeats.
Check Floppy and use appropriate diagnostic utility 209 Self Test Failed To Run SMART Self Test failed to start when executed. Seatools Diagnostic Test Retest. Re-test with appropriate diagnostic utility 222 Drive Failed the Test Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. For example, the "Reallocated Sectors Count" attribute's normalized value decreases as the count of reallocated sectors increases.
YES!! Smart Hdd Replace the drive if the error repeats. Replace Drive 216 10+ IDNF Errors Identified Data Not Found (IDNF) 10+. The lower 7 byte value is located at attribute 0xF2. 249 0xF9 NAND_Writes_1GiB Total NAND Writes.
Seatools Diagnostic Test
attribute meaning". http://threadspodcast.com/error-code/maxtor-error-code-list.html Please ensure that you are using the proper version of diagnostic utility. Drive should be replaced. This error may have internal and external reasons. Seatools Test Code Meaning
Don't show these FacebookTwitterEmailPrintGmailFavoritesMore... (294)Powered byAddThis Error Messages that Signify Drive Failure SMART error: Please see the following Knowledge Base articles for more information. Please ensure that you are using the version of diagnostic utility corresponding to either newer or older Western Digital drives. SMART Attributes were included in some drafts of the ATA standard, but were removed before the standard became final. http://threadspodcast.com/error-code/maxtor-error-code.html Retest after checking the connections.
This may be due to a defect with the drive or a bad connection. Seatools For Dos Replace. Replace the drive if the error repeats.
Selective Some drives allow selective self-tests of just a part of the surface. The self-test logs for SCSI and ATA drives are slightly different.
Replace Drive 217 2-9 SERVO Errors SERVO 2-9. Anything larger you will always (90%)of the time get the message. Re-test Drive with appropriate diagnostic utility 133 Illegal ID FW overlay not found. Seatools For Mac Durable.
Normalized value is set to one on test failure or 11 if the capacitor has been tested in an excessive temperature condition, otherwise 100. 176 0xB0 Erase Fail Count (chip) S.M.A.R.T. Replace the drive if the error repeats. Flag Permalink Reply This was helpful (0) Collapse - Rebuilding or Making HDD useable again... check over here The drive passes all tests!?